From 0ddcb72e0c0227e6325e632a70a6fefffef8c0fd Mon Sep 17 00:00:00 2001
From: Jon Whiteaker <jbw@jon-Latitude-D630>
Date: Thu, 5 Jan 2012 15:10:24 -0800
Subject: initial setup for kinect paper

---
 eccv.tex | 449 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 449 insertions(+)
 create mode 100755 eccv.tex

(limited to 'eccv.tex')

diff --git a/eccv.tex b/eccv.tex
new file mode 100755
index 0000000..d044ef4
--- /dev/null
+++ b/eccv.tex
@@ -0,0 +1,449 @@
+% last updated in April 2002 by Antje Endemann
+% Based on CVPR 07 and LNCS, with modifications by DAF, AZ and elle, 2008 and AA, 2010, and CC, 2011
+
+\documentclass[runningheads]{llncs}
+\usepackage{graphicx}
+\usepackage{amsmath,amssymb} % define this before the line numbering.
+\usepackage{ruler}
+\usepackage{color}
+\usepackage[width=122mm,left=12mm,paperwidth=146mm,height=193mm,top=12mm,paperheight=217mm]{geometry}
+\begin{document}
+% \renewcommand\thelinenumber{\color[rgb]{0.2,0.5,0.8}\normalfont\sffamily\scriptsize\arabic{linenumber}\color[rgb]{0,0,0}}
+% \renewcommand\makeLineNumber {\hss\thelinenumber\ \hspace{6mm} \rlap{\hskip\textwidth\ \hspace{6.5mm}\thelinenumber}}
+% \linenumbers
+\pagestyle{headings}
+\mainmatter
+\def\ECCV12SubNumber{***}  % Insert your submission number here
+
+\title{Author Guidelines for ECCV Submission} % Replace with your title
+
+\titlerunning{ECCV-12 submission ID \ECCV12SubNumber}
+
+\authorrunning{ECCV-12 submission ID \ECCV12SubNumber}
+
+\author{Anonymous ECCV submission}
+\institute{Paper ID \ECCV12SubNumber}
+
+
+\maketitle
+
+\begin{abstract}
+The abstract should summarize the contents of the paper and should
+contain at least 70 and at most 300 words. It should be set in 9-point
+font size and should be inset 1.0~cm from the right and left margins.
+\dots
+\end{abstract}
+
+
+\section{Introduction}
+
+
+Please follow the steps outlined below when submitting your manuscript.
+
+%-------------------------------------------------------------------------
+
+\subsection{Language}
+
+All manuscripts must be in English.
+
+\subsection{Paper length}
+The basic length is 12 pages, but up to two additional pages may be
+purchased in the final printed proceedings. This brings the {\em
+maximum} length for submission to 14 pages. Overlength papers will
+simply not be reviewed. This includes papers where the margins and
+formatting are deemed to have been significantly altered from those
+laid down by this style guide.  The reason such papers will not be
+reviewed is that there is no provision for supervised revisions of
+manuscripts. The reviewing process cannot determine the suitability of
+the paper for presentation in 14 pages if it is reviewed in 16.
+
+\subsection{Dual submission}
+
+By submitting a manuscript to ECCV, the author(s) assert that it
+has not been previously published in substantially similar form.
+Furthermore, no paper which contains significant overlap with the
+contributions of this paper either has been or will be submitted
+during the ECCV 2012 review period to either a journal or a
+conference.
+
+If there are any papers that may appear to the reviewers to violate
+this condition, then it is your responsibility to (1) cite these
+papers (preserving anonymity as described in section~\ref{sec:blind}
+of this example paper, (2) argue in the body of your paper why your
+ECCV paper is nontrivially different from these concurrent
+submissions, and (3) include anonymized versions of those papers in
+the supplemental material.
+
+\subsection{Supplemental Material}
+
+Authors may optionally upload supplemental material. Typically, this
+material might include videos of results that cannot be included in
+the main paper, anonymized related submissions to other conferences
+and journals, and appendices or technical reports containing extended
+proofs and mathematical derivations that are not essential for
+understanding of the paper. Note that the contents of the supplemental
+material should be referred to appropriately in the paper and that
+reviewers are not obliged to look at it.
+
+All supplemental material must be zipped or tarred into a single
+file. There is a 50MB limit on the size of this file. The deadline for
+supplemental material is five days after the main paper deadline.
+
+%-------------------------------------------------------------------------
+\subsection{Line numbering}
+
+All lines should be numbered, as in this example document.  This makes
+reviewing more efficient, because reviewers can refer to a line on a
+page.  If you are preparing a document using a non-\LaTeX\
+document preparation system, please arrange for an equivalent line numbering.
+
+\subsection{Mathematics}
+
+Please number all of your sections and displayed equations.  Again,
+this makes reviewing more efficient, because reviewers can refer to a
+line on a page.  Also, it is important for readers to be able to refer
+to any particular equation.  Just because you didn't refer to it in
+the text doesn't mean some future reader might not need to refer to
+it.  It is cumbersome to have to use circumlocutions like ``the
+equation second from the top of page 3 column 1''.  (Note that the
+line numbering will not be present in the final copy, so is not an
+alternative to equation numbers).  Some authors might benefit from
+reading Mermin's description of how to write mathematics:
+\url{http://www.cvpr.org/doc/mermin.pdf}.
+
+
+\section{Blind review}
+\label{sec:blind}
+
+Many authors misunderstand the concept of anonymizing for blind
+review.  Blind review does not mean that one must remove
+citations to one's own work---in fact it is often impossible to
+review a paper unless the previous citations are known and
+available.
+
+Blind review means that you do not use the words ``my'' or ``our''
+when citing previous work.  That is all.  (But see below for
+techreports).
+
+Saying ``this builds on the work of Lucy Smith [1]'' does not say
+that you are Lucy Smith, it says that you are building on her
+work.  If you are Smith and Jones, do not say ``as we show in
+[7]'', say ``as Smith and Jones show in [7]'' and at the end of the
+paper, include reference 7 as you would any other cited work.
+
+An example of a bad paper:
+\begin{quote}
+\begin{center}
+    An analysis of the frobnicatable foo filter.
+\end{center}
+
+   In this paper we present a performance analysis of our
+   previous paper [1], and show it to be inferior to all
+   previously known methods.  Why the previous paper was
+   accepted without this analysis is beyond me.
+
+   [1] Removed for blind review
+\end{quote}
+
+
+An example of an excellent paper:
+
+\begin{quote}
+\begin{center}
+     An analysis of the frobnicatable foo filter.
+\end{center}
+
+   In this paper we present a performance analysis of the
+   paper of Smith [1], and show it to be inferior to
+   all previously known methods.  Why the previous paper
+   was accepted without this analysis is beyond me.
+
+   [1] Smith, L and Jones, C. ``The frobnicatable foo
+   filter, a fundamental contribution to human knowledge''.
+   Nature 381(12), 1-213.
+\end{quote}
+
+If you are making a submission to another conference at the same
+time, which covers similar or overlapping material, you may need
+to refer to that submission in order to explain the differences,
+just as you would if you had previously published related work. In
+such cases, include the anonymized parallel
+submission~\cite{Authors12} as additional material and cite it as
+\begin{quote}
+1. Authors. ``The frobnicatable foo filter'', BMVC 2012 Submission
+ID 324, Supplied as additional material {\tt bmvc12.pdf}.
+\end{quote}
+
+Finally, you may feel you need to tell the reader that more
+details can be found elsewhere, and refer them to a technical
+report.  For conference submissions, the paper must stand on its
+own, and not {\em require} the reviewer to go to a techreport for
+further details.  Thus, you may say in the body of the paper
+``further details may be found in~\cite{Authors12b}''.  Then
+submit the techreport as additional material. Again, you may not
+assume the reviewers will read this material.
+
+Sometimes your paper is about a problem which you tested using a tool which
+is widely known to be restricted to a single institution.  For example,
+let's say it's 1969, you have solved a key problem on the Apollo lander,
+and you believe that the ECCV audience would like to hear about your
+solution.  The work is a development of your celebrated 1968 paper entitled
+``Zero-g frobnication: How being the only people in the world with access to
+the Apollo lander source code makes us a wow at parties'', by Zeus.
+
+You can handle this paper like any other.  Don't write ``We show how to
+improve our previous work [Anonymous, 1968].  This time we tested the
+algorithm on a lunar lander [name of lander removed for blind review]''.
+That would be silly, and would immediately identify the authors. Instead
+write the following:
+\begin{quotation}
+\noindent
+   We describe a system for zero-g frobnication.  This
+   system is new because it handles the following cases:
+   A, B.  Previous systems [Zeus et al. 1968] didn't
+   handle case B properly.  Ours handles it by including
+   a foo term in the bar integral.
+
+   ...
+
+   The proposed system was integrated with the Apollo
+   lunar lander, and went all the way to the moon, don't
+   you know.  It displayed the following behaviours
+   which show how well we solved cases A and B: ...
+\end{quotation}
+As you can see, the above text follows standard scientific convention,
+reads better than the first version, and does not explicitly name you as
+the authors.  A reviewer might think it likely that the new paper was
+written by Zeus, but cannot make any decision based on that guess.
+He or she would have to be sure that no other authors could have been
+contracted to solve problem B. \\
+
+\noindent FAQ: Are acknowledgements OK?  No. Please {\bf omit
+acknowledgements} in your review copy; they can go in the final copy.
+
+
+
+\section{Manuscript Preparation}
+This is an edited version of Springer LNCS instructions adapted
+for ECCV 2012 first paper submission.
+
+You are strongly encouraged to use \LaTeX2$_\varepsilon$ for the
+preparation of your
+camera-ready manuscript together with the corresponding Springer
+class file \verb+llncs.cls+.
+
+We would like to stress that the class/style files and the template
+should not be manipulated and that the guidelines regarding font sizes
+and format should be adhered to. This is to ensure that the end product
+is as homogeneous as possible.
+
+\subsection{Printing Area}
+The printing area is $122  \; \mbox{mm} \times 193 \;
+\mbox{mm}$.
+The text should be justified to occupy the full line width,
+so that the right margin is not ragged, with words hyphenated as
+appropriate. Please fill pages so that the length of the text
+is no less than 180~mm.
+
+\subsection{Layout, Typeface, Font Sizes, and Numbering}
+Use 10-point type for the name(s) of the author(s) and 9-point type for
+the address(es) and the abstract. For the main text, please use 10-point
+type and single-line spacing.
+We recommend using Computer Modern Roman (CM) fonts, Times, or one
+of the similar typefaces widely used in photo-typesetting.
+(In these typefaces the letters have serifs, i.e., short endstrokes at
+the head and the foot of letters.)
+Italic type may be used to emphasize words in running text. Bold
+type and underlining should be avoided.
+With these sizes, the interline distance should be set so that some 45
+lines occur on a full-text page.
+
+\subsubsection{Headings.}
+
+Headings should be capitalized
+(i.e., nouns, verbs, and all other words
+except articles, prepositions, and conjunctions should be set with an
+initial capital) and should,
+with the exception of the title, be aligned to the left.
+Words joined by a hyphen are subject to a special rule. If the first
+word can stand alone, the second word should be capitalized.
+The font sizes
+are given in Table~\ref{table:headings}.
+\setlength{\tabcolsep}{4pt}
+\begin{table}
+\begin{center}
+\caption{Font sizes of headings. Table captions should always be
+positioned {\it above} the tables. The final sentence of a table
+caption should end without a full stop}
+\label{table:headings}
+\begin{tabular}{lll}
+\hline\noalign{\smallskip}
+Heading level & Example & Font size and style\\
+\noalign{\smallskip}
+\hline
+\noalign{\smallskip}
+Title (centered)  & {\Large \bf Lecture Notes \dots} & 14 point, bold\\
+1st-level heading & {\large \bf 1 Introduction} & 12 point, bold\\
+2nd-level heading & {\bf 2.1 Printing Area} & 10 point, bold\\
+3rd-level heading & {\bf Headings.} Text follows \dots & 10 point, bold
+\\
+4th-level heading & {\it Remark.} Text follows \dots & 10 point,
+italic\\
+\hline
+\end{tabular}
+\end{center}
+\end{table}
+\setlength{\tabcolsep}{1.4pt}
+
+Here are
+some examples of headings: ``Criteria to Disprove Context-Freeness of
+Collage Languages'', ``On Correcting the Intrusion of Tracing
+Non-deterministic Programs by Software'', ``A User-Friendly and
+Extendable Data Distribution System'', ``Multi-flip Networks:
+Parallelizing GenSAT'', ``Self-determinations of Man''.
+
+\subsubsection{Lemmas, Propositions, and Theorems.}
+
+The numbers accorded to lemmas, propositions, and theorems etc. should
+appear in consecutive order, starting with the number 1, and not, for
+example, with the number 11.
+
+\subsection{Figures and Photographs}
+\label{sect:figures}
+
+Please produce your figures electronically and integrate
+them into your text file. For \LaTeX\ users we recommend using package
+\verb+graphicx+ or the style files \verb+psfig+ or \verb+epsf+.
+
+Check that in line drawings, lines are not
+interrupted and have constant width. Grids and details within the
+figures must be clearly readable and may not be written one on top of
+the other. Line drawings should have a resolution of at least 800 dpi
+(preferably 1200 dpi).
+For digital halftones 300 dpi is usually sufficient.
+The lettering in figures should have a height of 2~mm (10-point type).
+Figures should be scaled up or down accordingly.
+Please do not use any absolute coordinates in figures.
+
+Figures should be numbered and should have a caption which should
+always be positioned {\it under} the figures, in contrast to the caption
+belonging to a table, which should always appear {\it above} the table.
+Please center the captions between the margins and set them in
+9-point type
+(Fig.~\ref{fig:example} shows an example).
+The distance between text and figure should be about 8~mm, the
+distance between figure and caption about 5~mm.
+\begin{figure}
+\centering
+\includegraphics[height=7.2cm]{eijkel2}
+\caption{One kernel at $x_s$ ({\it dotted kernel}) or two kernels at
+$x_i$ and $x_j$ ({\it left and right}) lead to the same summed estimate
+at $x_s$. This shows a figure consisting of different types of
+lines. Elements of the figure described in the caption should be set in
+italics,
+in parentheses, as shown in this sample caption. The last
+sentence of a figure caption should generally end without a full stop}
+\label{fig:example}
+\end{figure}
+
+If possible (e.g. if you use \LaTeX) please define figures as floating
+objects. \LaTeX\ users, please avoid using the location
+parameter ``h'' for ``here''. If you have to insert a pagebreak before a
+figure, please ensure that the previous page is completely filled.
+
+
+\subsection{Formulas}
+
+Displayed equations or formulas are centered and set on a separate
+line (with an extra line or halfline space above and below). Displayed
+expressions should be numbered for reference. The numbers should be
+consecutive within the contribution,
+with numbers enclosed in parentheses and set on the right margin.
+For example,
+\begin{align}
+  \psi (u) & = \int_{0}^{T} \left[\frac{1}{2}
+  \left(\Lambda_{0}^{-1} u,u\right) + N^{\ast} (-u)\right] dt \; \\
+& = 0 ?
+\end{align}
+
+Please punctuate a displayed equation in the same way as ordinary
+text but with a small space before the end punctuation.
+
+\subsection{Program Code}
+
+Program listings or program commands in the text are normally set in
+typewriter font, e.g., CMTT10 or Courier.
+
+\medskip
+
+\noindent
+{\it Example of a Computer Program}
+\begin{verbatim}
+program Inflation (Output)
+  {Assuming annual inflation rates of 7%, 8%, and 10%,...
+   years};
+   const
+     MaxYears = 10;
+   var
+     Year: 0..MaxYears;
+     Factor1, Factor2, Factor3: Real;
+   begin
+     Year := 0;
+     Factor1 := 1.0; Factor2 := 1.0; Factor3 := 1.0;
+     WriteLn('Year  7% 8% 10%'); WriteLn;
+     repeat
+       Year := Year + 1;
+       Factor1 := Factor1 * 1.07;
+       Factor2 := Factor2 * 1.08;
+       Factor3 := Factor3 * 1.10;
+       WriteLn(Year:5,Factor1:7:3,Factor2:7:3,Factor3:7:3)
+     until Year = MaxYears
+end.
+\end{verbatim}
+%
+\noindent
+{\small (Example from Jensen K., Wirth N. (1991) Pascal user manual and
+report. Springer, New York)}
+
+
+\subsection{Footnotes}
+
+The superscript numeral used to refer to a footnote appears in the text
+either directly after the word to be discussed or -- in relation to a
+phrase or a sentence -- following the punctuation sign (comma,
+semicolon, or full stop). Footnotes should appear at the bottom of
+the
+normal text area, with a line of about 2~cm in \TeX\ and about 5~cm in
+Word set
+immediately above them.\footnote{The footnote numeral is set flush left
+and the text follows with the usual word spacing. Second and subsequent
+lines are indented. Footnotes should end with a full stop.}
+
+\subsection{Citations}
+
+The list of references is headed ``References" and is not assigned a
+number
+in the decimal system of headings. The list should be set in small print
+and placed at the end of your contribution, in front of the appendix,
+if one exists.
+Please do not insert a pagebreak before the list of references if the
+page is not completely filled.
+An example is given at the
+end of this information sheet. For citations in the text please use
+square brackets and consecutive numbers: \cite{Alpher02},
+\cite{Alpher03}, \cite{Alpher04} \dots
+
+
+\bibliographystyle{splncs}
+\bibliography{egbib}
+
+\clearpage\mbox{}Page \thepage\ of the manuscript.
+\clearpage\mbox{}Page \thepage\ of the manuscript.
+\clearpage\mbox{}Page \thepage\ of the manuscript.
+\clearpage\mbox{}Page \thepage\ of the manuscript.
+\clearpage\mbox{}Page \thepage\ of the manuscript.
+\clearpage\mbox{}Page \thepage\ of the manuscript.
+This is the last page of the manuscript.
+\par\vfill\par
+Now we have reached the maximum size of the ECCV 2012 submission.
+\end{document}
-- 
cgit v1.2.3-70-g09d2

