From 63cf899f370aba52e3cb57ce876aaca9d9180e0f Mon Sep 17 00:00:00 2001 From: Thibaut Horel Date: Thu, 1 Mar 2012 03:25:09 -0800 Subject: Remove eccv.tex (eccv guidelines) to avoid confusion. --- eccv.tex | 449 --------------------------------------------------------------- 1 file changed, 449 deletions(-) delete mode 100644 eccv.tex (limited to 'eccv.tex') diff --git a/eccv.tex b/eccv.tex deleted file mode 100644 index d044ef4..0000000 --- a/eccv.tex +++ /dev/null @@ -1,449 +0,0 @@ -% last updated in April 2002 by Antje Endemann -% Based on CVPR 07 and LNCS, with modifications by DAF, AZ and elle, 2008 and AA, 2010, and CC, 2011 - -\documentclass[runningheads]{llncs} -\usepackage{graphicx} -\usepackage{amsmath,amssymb} % define this before the line numbering. -\usepackage{ruler} -\usepackage{color} -\usepackage[width=122mm,left=12mm,paperwidth=146mm,height=193mm,top=12mm,paperheight=217mm]{geometry} -\begin{document} -% \renewcommand\thelinenumber{\color[rgb]{0.2,0.5,0.8}\normalfont\sffamily\scriptsize\arabic{linenumber}\color[rgb]{0,0,0}} -% \renewcommand\makeLineNumber {\hss\thelinenumber\ \hspace{6mm} \rlap{\hskip\textwidth\ \hspace{6.5mm}\thelinenumber}} -% \linenumbers -\pagestyle{headings} -\mainmatter -\def\ECCV12SubNumber{***} % Insert your submission number here - -\title{Author Guidelines for ECCV Submission} % Replace with your title - -\titlerunning{ECCV-12 submission ID \ECCV12SubNumber} - -\authorrunning{ECCV-12 submission ID \ECCV12SubNumber} - -\author{Anonymous ECCV submission} -\institute{Paper ID \ECCV12SubNumber} - - -\maketitle - -\begin{abstract} -The abstract should summarize the contents of the paper and should -contain at least 70 and at most 300 words. It should be set in 9-point -font size and should be inset 1.0~cm from the right and left margins. -\dots -\end{abstract} - - -\section{Introduction} - - -Please follow the steps outlined below when submitting your manuscript. - -%------------------------------------------------------------------------- - -\subsection{Language} - -All manuscripts must be in English. - -\subsection{Paper length} -The basic length is 12 pages, but up to two additional pages may be -purchased in the final printed proceedings. This brings the {\em -maximum} length for submission to 14 pages. Overlength papers will -simply not be reviewed. This includes papers where the margins and -formatting are deemed to have been significantly altered from those -laid down by this style guide. The reason such papers will not be -reviewed is that there is no provision for supervised revisions of -manuscripts. The reviewing process cannot determine the suitability of -the paper for presentation in 14 pages if it is reviewed in 16. - -\subsection{Dual submission} - -By submitting a manuscript to ECCV, the author(s) assert that it -has not been previously published in substantially similar form. -Furthermore, no paper which contains significant overlap with the -contributions of this paper either has been or will be submitted -during the ECCV 2012 review period to either a journal or a -conference. - -If there are any papers that may appear to the reviewers to violate -this condition, then it is your responsibility to (1) cite these -papers (preserving anonymity as described in section~\ref{sec:blind} -of this example paper, (2) argue in the body of your paper why your -ECCV paper is nontrivially different from these concurrent -submissions, and (3) include anonymized versions of those papers in -the supplemental material. - -\subsection{Supplemental Material} - -Authors may optionally upload supplemental material. Typically, this -material might include videos of results that cannot be included in -the main paper, anonymized related submissions to other conferences -and journals, and appendices or technical reports containing extended -proofs and mathematical derivations that are not essential for -understanding of the paper. Note that the contents of the supplemental -material should be referred to appropriately in the paper and that -reviewers are not obliged to look at it. - -All supplemental material must be zipped or tarred into a single -file. There is a 50MB limit on the size of this file. The deadline for -supplemental material is five days after the main paper deadline. - -%------------------------------------------------------------------------- -\subsection{Line numbering} - -All lines should be numbered, as in this example document. This makes -reviewing more efficient, because reviewers can refer to a line on a -page. If you are preparing a document using a non-\LaTeX\ -document preparation system, please arrange for an equivalent line numbering. - -\subsection{Mathematics} - -Please number all of your sections and displayed equations. Again, -this makes reviewing more efficient, because reviewers can refer to a -line on a page. Also, it is important for readers to be able to refer -to any particular equation. Just because you didn't refer to it in -the text doesn't mean some future reader might not need to refer to -it. It is cumbersome to have to use circumlocutions like ``the -equation second from the top of page 3 column 1''. (Note that the -line numbering will not be present in the final copy, so is not an -alternative to equation numbers). Some authors might benefit from -reading Mermin's description of how to write mathematics: -\url{http://www.cvpr.org/doc/mermin.pdf}. - - -\section{Blind review} -\label{sec:blind} - -Many authors misunderstand the concept of anonymizing for blind -review. Blind review does not mean that one must remove -citations to one's own work---in fact it is often impossible to -review a paper unless the previous citations are known and -available. - -Blind review means that you do not use the words ``my'' or ``our'' -when citing previous work. That is all. (But see below for -techreports). - -Saying ``this builds on the work of Lucy Smith [1]'' does not say -that you are Lucy Smith, it says that you are building on her -work. If you are Smith and Jones, do not say ``as we show in -[7]'', say ``as Smith and Jones show in [7]'' and at the end of the -paper, include reference 7 as you would any other cited work. - -An example of a bad paper: -\begin{quote} -\begin{center} - An analysis of the frobnicatable foo filter. -\end{center} - - In this paper we present a performance analysis of our - previous paper [1], and show it to be inferior to all - previously known methods. Why the previous paper was - accepted without this analysis is beyond me. - - [1] Removed for blind review -\end{quote} - - -An example of an excellent paper: - -\begin{quote} -\begin{center} - An analysis of the frobnicatable foo filter. -\end{center} - - In this paper we present a performance analysis of the - paper of Smith [1], and show it to be inferior to - all previously known methods. Why the previous paper - was accepted without this analysis is beyond me. - - [1] Smith, L and Jones, C. ``The frobnicatable foo - filter, a fundamental contribution to human knowledge''. - Nature 381(12), 1-213. -\end{quote} - -If you are making a submission to another conference at the same -time, which covers similar or overlapping material, you may need -to refer to that submission in order to explain the differences, -just as you would if you had previously published related work. In -such cases, include the anonymized parallel -submission~\cite{Authors12} as additional material and cite it as -\begin{quote} -1. Authors. ``The frobnicatable foo filter'', BMVC 2012 Submission -ID 324, Supplied as additional material {\tt bmvc12.pdf}. -\end{quote} - -Finally, you may feel you need to tell the reader that more -details can be found elsewhere, and refer them to a technical -report. For conference submissions, the paper must stand on its -own, and not {\em require} the reviewer to go to a techreport for -further details. Thus, you may say in the body of the paper -``further details may be found in~\cite{Authors12b}''. Then -submit the techreport as additional material. Again, you may not -assume the reviewers will read this material. - -Sometimes your paper is about a problem which you tested using a tool which -is widely known to be restricted to a single institution. For example, -let's say it's 1969, you have solved a key problem on the Apollo lander, -and you believe that the ECCV audience would like to hear about your -solution. The work is a development of your celebrated 1968 paper entitled -``Zero-g frobnication: How being the only people in the world with access to -the Apollo lander source code makes us a wow at parties'', by Zeus. - -You can handle this paper like any other. Don't write ``We show how to -improve our previous work [Anonymous, 1968]. This time we tested the -algorithm on a lunar lander [name of lander removed for blind review]''. -That would be silly, and would immediately identify the authors. Instead -write the following: -\begin{quotation} -\noindent - We describe a system for zero-g frobnication. This - system is new because it handles the following cases: - A, B. Previous systems [Zeus et al. 1968] didn't - handle case B properly. Ours handles it by including - a foo term in the bar integral. - - ... - - The proposed system was integrated with the Apollo - lunar lander, and went all the way to the moon, don't - you know. It displayed the following behaviours - which show how well we solved cases A and B: ... -\end{quotation} -As you can see, the above text follows standard scientific convention, -reads better than the first version, and does not explicitly name you as -the authors. A reviewer might think it likely that the new paper was -written by Zeus, but cannot make any decision based on that guess. -He or she would have to be sure that no other authors could have been -contracted to solve problem B. \\ - -\noindent FAQ: Are acknowledgements OK? No. Please {\bf omit -acknowledgements} in your review copy; they can go in the final copy. - - - -\section{Manuscript Preparation} -This is an edited version of Springer LNCS instructions adapted -for ECCV 2012 first paper submission. - -You are strongly encouraged to use \LaTeX2$_\varepsilon$ for the -preparation of your -camera-ready manuscript together with the corresponding Springer -class file \verb+llncs.cls+. - -We would like to stress that the class/style files and the template -should not be manipulated and that the guidelines regarding font sizes -and format should be adhered to. This is to ensure that the end product -is as homogeneous as possible. - -\subsection{Printing Area} -The printing area is $122 \; \mbox{mm} \times 193 \; -\mbox{mm}$. -The text should be justified to occupy the full line width, -so that the right margin is not ragged, with words hyphenated as -appropriate. Please fill pages so that the length of the text -is no less than 180~mm. - -\subsection{Layout, Typeface, Font Sizes, and Numbering} -Use 10-point type for the name(s) of the author(s) and 9-point type for -the address(es) and the abstract. For the main text, please use 10-point -type and single-line spacing. -We recommend using Computer Modern Roman (CM) fonts, Times, or one -of the similar typefaces widely used in photo-typesetting. -(In these typefaces the letters have serifs, i.e., short endstrokes at -the head and the foot of letters.) -Italic type may be used to emphasize words in running text. Bold -type and underlining should be avoided. -With these sizes, the interline distance should be set so that some 45 -lines occur on a full-text page. - -\subsubsection{Headings.} - -Headings should be capitalized -(i.e., nouns, verbs, and all other words -except articles, prepositions, and conjunctions should be set with an -initial capital) and should, -with the exception of the title, be aligned to the left. -Words joined by a hyphen are subject to a special rule. If the first -word can stand alone, the second word should be capitalized. -The font sizes -are given in Table~\ref{table:headings}. -\setlength{\tabcolsep}{4pt} -\begin{table} -\begin{center} -\caption{Font sizes of headings. Table captions should always be -positioned {\it above} the tables. The final sentence of a table -caption should end without a full stop} -\label{table:headings} -\begin{tabular}{lll} -\hline\noalign{\smallskip} -Heading level & Example & Font size and style\\ -\noalign{\smallskip} -\hline -\noalign{\smallskip} -Title (centered) & {\Large \bf Lecture Notes \dots} & 14 point, bold\\ -1st-level heading & {\large \bf 1 Introduction} & 12 point, bold\\ -2nd-level heading & {\bf 2.1 Printing Area} & 10 point, bold\\ -3rd-level heading & {\bf Headings.} Text follows \dots & 10 point, bold -\\ -4th-level heading & {\it Remark.} Text follows \dots & 10 point, -italic\\ -\hline -\end{tabular} -\end{center} -\end{table} -\setlength{\tabcolsep}{1.4pt} - -Here are -some examples of headings: ``Criteria to Disprove Context-Freeness of -Collage Languages'', ``On Correcting the Intrusion of Tracing -Non-deterministic Programs by Software'', ``A User-Friendly and -Extendable Data Distribution System'', ``Multi-flip Networks: -Parallelizing GenSAT'', ``Self-determinations of Man''. - -\subsubsection{Lemmas, Propositions, and Theorems.} - -The numbers accorded to lemmas, propositions, and theorems etc. should -appear in consecutive order, starting with the number 1, and not, for -example, with the number 11. - -\subsection{Figures and Photographs} -\label{sect:figures} - -Please produce your figures electronically and integrate -them into your text file. For \LaTeX\ users we recommend using package -\verb+graphicx+ or the style files \verb+psfig+ or \verb+epsf+. - -Check that in line drawings, lines are not -interrupted and have constant width. Grids and details within the -figures must be clearly readable and may not be written one on top of -the other. Line drawings should have a resolution of at least 800 dpi -(preferably 1200 dpi). -For digital halftones 300 dpi is usually sufficient. -The lettering in figures should have a height of 2~mm (10-point type). -Figures should be scaled up or down accordingly. -Please do not use any absolute coordinates in figures. - -Figures should be numbered and should have a caption which should -always be positioned {\it under} the figures, in contrast to the caption -belonging to a table, which should always appear {\it above} the table. -Please center the captions between the margins and set them in -9-point type -(Fig.~\ref{fig:example} shows an example). -The distance between text and figure should be about 8~mm, the -distance between figure and caption about 5~mm. -\begin{figure} -\centering -\includegraphics[height=7.2cm]{eijkel2} -\caption{One kernel at $x_s$ ({\it dotted kernel}) or two kernels at -$x_i$ and $x_j$ ({\it left and right}) lead to the same summed estimate -at $x_s$. This shows a figure consisting of different types of -lines. Elements of the figure described in the caption should be set in -italics, -in parentheses, as shown in this sample caption. The last -sentence of a figure caption should generally end without a full stop} -\label{fig:example} -\end{figure} - -If possible (e.g. if you use \LaTeX) please define figures as floating -objects. \LaTeX\ users, please avoid using the location -parameter ``h'' for ``here''. If you have to insert a pagebreak before a -figure, please ensure that the previous page is completely filled. - - -\subsection{Formulas} - -Displayed equations or formulas are centered and set on a separate -line (with an extra line or halfline space above and below). Displayed -expressions should be numbered for reference. The numbers should be -consecutive within the contribution, -with numbers enclosed in parentheses and set on the right margin. -For example, -\begin{align} - \psi (u) & = \int_{0}^{T} \left[\frac{1}{2} - \left(\Lambda_{0}^{-1} u,u\right) + N^{\ast} (-u)\right] dt \; \\ -& = 0 ? -\end{align} - -Please punctuate a displayed equation in the same way as ordinary -text but with a small space before the end punctuation. - -\subsection{Program Code} - -Program listings or program commands in the text are normally set in -typewriter font, e.g., CMTT10 or Courier. - -\medskip - -\noindent -{\it Example of a Computer Program} -\begin{verbatim} -program Inflation (Output) - {Assuming annual inflation rates of 7%, 8%, and 10%,... - years}; - const - MaxYears = 10; - var - Year: 0..MaxYears; - Factor1, Factor2, Factor3: Real; - begin - Year := 0; - Factor1 := 1.0; Factor2 := 1.0; Factor3 := 1.0; - WriteLn('Year 7% 8% 10%'); WriteLn; - repeat - Year := Year + 1; - Factor1 := Factor1 * 1.07; - Factor2 := Factor2 * 1.08; - Factor3 := Factor3 * 1.10; - WriteLn(Year:5,Factor1:7:3,Factor2:7:3,Factor3:7:3) - until Year = MaxYears -end. -\end{verbatim} -% -\noindent -{\small (Example from Jensen K., Wirth N. (1991) Pascal user manual and -report. Springer, New York)} - - -\subsection{Footnotes} - -The superscript numeral used to refer to a footnote appears in the text -either directly after the word to be discussed or -- in relation to a -phrase or a sentence -- following the punctuation sign (comma, -semicolon, or full stop). Footnotes should appear at the bottom of -the -normal text area, with a line of about 2~cm in \TeX\ and about 5~cm in -Word set -immediately above them.\footnote{The footnote numeral is set flush left -and the text follows with the usual word spacing. Second and subsequent -lines are indented. Footnotes should end with a full stop.} - -\subsection{Citations} - -The list of references is headed ``References" and is not assigned a -number -in the decimal system of headings. The list should be set in small print -and placed at the end of your contribution, in front of the appendix, -if one exists. -Please do not insert a pagebreak before the list of references if the -page is not completely filled. -An example is given at the -end of this information sheet. For citations in the text please use -square brackets and consecutive numbers: \cite{Alpher02}, -\cite{Alpher03}, \cite{Alpher04} \dots - - -\bibliographystyle{splncs} -\bibliography{egbib} - -\clearpage\mbox{}Page \thepage\ of the manuscript. -\clearpage\mbox{}Page \thepage\ of the manuscript. -\clearpage\mbox{}Page \thepage\ of the manuscript. -\clearpage\mbox{}Page \thepage\ of the manuscript. -\clearpage\mbox{}Page \thepage\ of the manuscript. -\clearpage\mbox{}Page \thepage\ of the manuscript. -This is the last page of the manuscript. -\par\vfill\par -Now we have reached the maximum size of the ECCV 2012 submission. -\end{document} -- cgit v1.2.3-70-g09d2