initial setup for kinect paper

1 files changed, 449 insertions, 0 deletions

diff --git a/eccv.tex b/eccv.tex
new file mode 100755
index 0000000..d044ef4
--- /dev/null
+++ b/eccv.tex
@@ -0,0 +1,449 @@
+% last updated in April 2002 by Antje Endemann

+% Based on CVPR 07 and LNCS, with modifications by DAF, AZ and elle, 2008 and AA, 2010, and CC, 2011

+

+\documentclass[runningheads]{llncs}

+\usepackage{graphicx}

+\usepackage{amsmath,amssymb} % define this before the line numbering.

+\usepackage{ruler}

+\usepackage{color}

+\usepackage[width=122mm,left=12mm,paperwidth=146mm,height=193mm,top=12mm,paperheight=217mm]{geometry}

+\begin{document}

+% \renewcommand\thelinenumber{\color[rgb]{0.2,0.5,0.8}\normalfont\sffamily\scriptsize\arabic{linenumber}\color[rgb]{0,0,0}}

+% \renewcommand\makeLineNumber {\hss\thelinenumber\ \hspace{6mm} \rlap{\hskip\textwidth\ \hspace{6.5mm}\thelinenumber}}

+% \linenumbers

+\pagestyle{headings}

+\mainmatter

+\def\ECCV12SubNumber{***}  % Insert your submission number here

+

+\title{Author Guidelines for ECCV Submission} % Replace with your title

+

+\titlerunning{ECCV-12 submission ID \ECCV12SubNumber}

+

+\authorrunning{ECCV-12 submission ID \ECCV12SubNumber}

+

+\author{Anonymous ECCV submission}

+\institute{Paper ID \ECCV12SubNumber}

+

+

+\maketitle

+

+\begin{abstract}

+The abstract should summarize the contents of the paper and should

+contain at least 70 and at most 300 words. It should be set in 9-point

+font size and should be inset 1.0~cm from the right and left margins.

+\dots

+\end{abstract}

+

+

+\section{Introduction}

+

+

+Please follow the steps outlined below when submitting your manuscript.

+

+%-------------------------------------------------------------------------

+

+\subsection{Language}

+

+All manuscripts must be in English.

+

+\subsection{Paper length}

+The basic length is 12 pages, but up to two additional pages may be

+purchased in the final printed proceedings. This brings the {\em

+maximum} length for submission to 14 pages. Overlength papers will

+simply not be reviewed. This includes papers where the margins and

+formatting are deemed to have been significantly altered from those

+laid down by this style guide.  The reason such papers will not be

+reviewed is that there is no provision for supervised revisions of

+manuscripts. The reviewing process cannot determine the suitability of

+the paper for presentation in 14 pages if it is reviewed in 16.

+

+\subsection{Dual submission}

+

+By submitting a manuscript to ECCV, the author(s) assert that it

+has not been previously published in substantially similar form.

+Furthermore, no paper which contains significant overlap with the

+contributions of this paper either has been or will be submitted

+during the ECCV 2012 review period to either a journal or a

+conference.

+

+If there are any papers that may appear to the reviewers to violate

+this condition, then it is your responsibility to (1) cite these

+papers (preserving anonymity as described in section~\ref{sec:blind}

+of this example paper, (2) argue in the body of your paper why your

+ECCV paper is nontrivially different from these concurrent

+submissions, and (3) include anonymized versions of those papers in

+the supplemental material.

+

+\subsection{Supplemental Material}

+

+Authors may optionally upload supplemental material. Typically, this

+material might include videos of results that cannot be included in

+the main paper, anonymized related submissions to other conferences

+and journals, and appendices or technical reports containing extended

+proofs and mathematical derivations that are not essential for

+understanding of the paper. Note that the contents of the supplemental

+material should be referred to appropriately in the paper and that

+reviewers are not obliged to look at it.

+

+All supplemental material must be zipped or tarred into a single

+file. There is a 50MB limit on the size of this file. The deadline for

+supplemental material is five days after the main paper deadline.

+

+%-------------------------------------------------------------------------

+\subsection{Line numbering}

+

+All lines should be numbered, as in this example document.  This makes

+reviewing more efficient, because reviewers can refer to a line on a

+page.  If you are preparing a document using a non-\LaTeX\

+document preparation system, please arrange for an equivalent line numbering.

+

+\subsection{Mathematics}

+

+Please number all of your sections and displayed equations.  Again,

+this makes reviewing more efficient, because reviewers can refer to a

+line on a page.  Also, it is important for readers to be able to refer

+to any particular equation.  Just because you didn't refer to it in

+the text doesn't mean some future reader might not need to refer to

+it.  It is cumbersome to have to use circumlocutions like ``the

+equation second from the top of page 3 column 1''.  (Note that the

+line numbering will not be present in the final copy, so is not an

+alternative to equation numbers).  Some authors might benefit from

+reading Mermin's description of how to write mathematics:

+\url{http://www.cvpr.org/doc/mermin.pdf}.

+

+

+\section{Blind review}

+\label{sec:blind}

+

+Many authors misunderstand the concept of anonymizing for blind

+review.  Blind review does not mean that one must remove

+citations to one's own work---in fact it is often impossible to

+review a paper unless the previous citations are known and

+available.

+

+Blind review means that you do not use the words ``my'' or ``our''

+when citing previous work.  That is all.  (But see below for

+techreports).

+

+Saying ``this builds on the work of Lucy Smith [1]'' does not say

+that you are Lucy Smith, it says that you are building on her

+work.  If you are Smith and Jones, do not say ``as we show in

+[7]'', say ``as Smith and Jones show in [7]'' and at the end of the

+paper, include reference 7 as you would any other cited work.

+

+An example of a bad paper:

+\begin{quote}

+\begin{center}

+    An analysis of the frobnicatable foo filter.

+\end{center}

+

+   In this paper we present a performance analysis of our

+   previous paper [1], and show it to be inferior to all

+   previously known methods.  Why the previous paper was

+   accepted without this analysis is beyond me.

+

+   [1] Removed for blind review

+\end{quote}

+

+

+An example of an excellent paper:

+

+\begin{quote}

+\begin{center}

+     An analysis of the frobnicatable foo filter.

+\end{center}

+

+   In this paper we present a performance analysis of the

+   paper of Smith [1], and show it to be inferior to

+   all previously known methods.  Why the previous paper

+   was accepted without this analysis is beyond me.

+

+   [1] Smith, L and Jones, C. ``The frobnicatable foo

+   filter, a fundamental contribution to human knowledge''.

+   Nature 381(12), 1-213.

+\end{quote}

+

+If you are making a submission to another conference at the same

+time, which covers similar or overlapping material, you may need

+to refer to that submission in order to explain the differences,

+just as you would if you had previously published related work. In

+such cases, include the anonymized parallel

+submission~\cite{Authors12} as additional material and cite it as

+\begin{quote}

+1. Authors. ``The frobnicatable foo filter'', BMVC 2012 Submission

+ID 324, Supplied as additional material {\tt bmvc12.pdf}.

+\end{quote}

+

+Finally, you may feel you need to tell the reader that more

+details can be found elsewhere, and refer them to a technical

+report.  For conference submissions, the paper must stand on its

+own, and not {\em require} the reviewer to go to a techreport for

+further details.  Thus, you may say in the body of the paper

+``further details may be found in~\cite{Authors12b}''.  Then

+submit the techreport as additional material. Again, you may not

+assume the reviewers will read this material.

+

+Sometimes your paper is about a problem which you tested using a tool which

+is widely known to be restricted to a single institution.  For example,

+let's say it's 1969, you have solved a key problem on the Apollo lander,

+and you believe that the ECCV audience would like to hear about your

+solution.  The work is a development of your celebrated 1968 paper entitled

+``Zero-g frobnication: How being the only people in the world with access to

+the Apollo lander source code makes us a wow at parties'', by Zeus.

+

+You can handle this paper like any other.  Don't write ``We show how to

+improve our previous work [Anonymous, 1968].  This time we tested the

+algorithm on a lunar lander [name of lander removed for blind review]''.

+That would be silly, and would immediately identify the authors. Instead

+write the following:

+\begin{quotation}

+\noindent

+   We describe a system for zero-g frobnication.  This

+   system is new because it handles the following cases:

+   A, B.  Previous systems [Zeus et al. 1968] didn't

+   handle case B properly.  Ours handles it by including

+   a foo term in the bar integral.

+

+   ...

+

+   The proposed system was integrated with the Apollo

+   lunar lander, and went all the way to the moon, don't

+   you know.  It displayed the following behaviours

+   which show how well we solved cases A and B: ...

+\end{quotation}

+As you can see, the above text follows standard scientific convention,

+reads better than the first version, and does not explicitly name you as

+the authors.  A reviewer might think it likely that the new paper was

+written by Zeus, but cannot make any decision based on that guess.

+He or she would have to be sure that no other authors could have been

+contracted to solve problem B. \\

+

+\noindent FAQ: Are acknowledgements OK?  No. Please {\bf omit

+acknowledgements} in your review copy; they can go in the final copy.

+

+

+

+\section{Manuscript Preparation}

+This is an edited version of Springer LNCS instructions adapted

+for ECCV 2012 first paper submission.

+

+You are strongly encouraged to use \LaTeX2$_\varepsilon$ for the

+preparation of your

+camera-ready manuscript together with the corresponding Springer

+class file \verb+llncs.cls+.

+

+We would like to stress that the class/style files and the template

+should not be manipulated and that the guidelines regarding font sizes

+and format should be adhered to. This is to ensure that the end product

+is as homogeneous as possible.

+

+\subsection{Printing Area}

+The printing area is $122  \; \mbox{mm} \times 193 \;

+\mbox{mm}$.

+The text should be justified to occupy the full line width,

+so that the right margin is not ragged, with words hyphenated as

+appropriate. Please fill pages so that the length of the text

+is no less than 180~mm.

+

+\subsection{Layout, Typeface, Font Sizes, and Numbering}

+Use 10-point type for the name(s) of the author(s) and 9-point type for

+the address(es) and the abstract. For the main text, please use 10-point

+type and single-line spacing.

+We recommend using Computer Modern Roman (CM) fonts, Times, or one

+of the similar typefaces widely used in photo-typesetting.

+(In these typefaces the letters have serifs, i.e., short endstrokes at

+the head and the foot of letters.)

+Italic type may be used to emphasize words in running text. Bold

+type and underlining should be avoided.

+With these sizes, the interline distance should be set so that some 45

+lines occur on a full-text page.

+

+\subsubsection{Headings.}

+

+Headings should be capitalized

+(i.e., nouns, verbs, and all other words

+except articles, prepositions, and conjunctions should be set with an

+initial capital) and should,

+with the exception of the title, be aligned to the left.

+Words joined by a hyphen are subject to a special rule. If the first

+word can stand alone, the second word should be capitalized.

+The font sizes

+are given in Table~\ref{table:headings}.

+\setlength{\tabcolsep}{4pt}

+\begin{table}

+\begin{center}

+\caption{Font sizes of headings. Table captions should always be

+positioned {\it above} the tables. The final sentence of a table

+caption should end without a full stop}

+\label{table:headings}

+\begin{tabular}{lll}

+\hline\noalign{\smallskip}

+Heading level & Example & Font size and style\\

+\noalign{\smallskip}

+\hline

+\noalign{\smallskip}

+Title (centered)  & {\Large \bf Lecture Notes \dots} & 14 point, bold\\

+1st-level heading & {\large \bf 1 Introduction} & 12 point, bold\\

+2nd-level heading & {\bf 2.1 Printing Area} & 10 point, bold\\

+3rd-level heading & {\bf Headings.} Text follows \dots & 10 point, bold

+\\

+4th-level heading & {\it Remark.} Text follows \dots & 10 point,

+italic\\

+\hline

+\end{tabular}

+\end{center}

+\end{table}

+\setlength{\tabcolsep}{1.4pt}

+

+Here are

+some examples of headings: ``Criteria to Disprove Context-Freeness of

+Collage Languages'', ``On Correcting the Intrusion of Tracing

+Non-deterministic Programs by Software'', ``A User-Friendly and

+Extendable Data Distribution System'', ``Multi-flip Networks:

+Parallelizing GenSAT'', ``Self-determinations of Man''.

+

+\subsubsection{Lemmas, Propositions, and Theorems.}

+

+The numbers accorded to lemmas, propositions, and theorems etc. should

+appear in consecutive order, starting with the number 1, and not, for

+example, with the number 11.

+

+\subsection{Figures and Photographs}

+\label{sect:figures}

+

+Please produce your figures electronically and integrate

+them into your text file. For \LaTeX\ users we recommend using package

+\verb+graphicx+ or the style files \verb+psfig+ or \verb+epsf+.

+

+Check that in line drawings, lines are not

+interrupted and have constant width. Grids and details within the

+figures must be clearly readable and may not be written one on top of

+the other. Line drawings should have a resolution of at least 800 dpi

+(preferably 1200 dpi).

+For digital halftones 300 dpi is usually sufficient.

+The lettering in figures should have a height of 2~mm (10-point type).

+Figures should be scaled up or down accordingly.

+Please do not use any absolute coordinates in figures.

+

+Figures should be numbered and should have a caption which should

+always be positioned {\it under} the figures, in contrast to the caption

+belonging to a table, which should always appear {\it above} the table.

+Please center the captions between the margins and set them in

+9-point type

+(Fig.~\ref{fig:example} shows an example).

+The distance between text and figure should be about 8~mm, the

+distance between figure and caption about 5~mm.

+\begin{figure}

+\centering

+\includegraphics[height=7.2cm]{eijkel2}

+\caption{One kernel at $x_s$ ({\it dotted kernel}) or two kernels at

+$x_i$ and $x_j$ ({\it left and right}) lead to the same summed estimate

+at $x_s$. This shows a figure consisting of different types of

+lines. Elements of the figure described in the caption should be set in

+italics,

+in parentheses, as shown in this sample caption. The last

+sentence of a figure caption should generally end without a full stop}

+\label{fig:example}

+\end{figure}

+

+If possible (e.g. if you use \LaTeX) please define figures as floating

+objects. \LaTeX\ users, please avoid using the location

+parameter ``h'' for ``here''. If you have to insert a pagebreak before a

+figure, please ensure that the previous page is completely filled.

+

+

+\subsection{Formulas}

+

+Displayed equations or formulas are centered and set on a separate

+line (with an extra line or halfline space above and below). Displayed

+expressions should be numbered for reference. The numbers should be

+consecutive within the contribution,

+with numbers enclosed in parentheses and set on the right margin.

+For example,

+\begin{align}

+  \psi (u) & = \int_{0}^{T} \left[\frac{1}{2}

+  \left(\Lambda_{0}^{-1} u,u\right) + N^{\ast} (-u)\right] dt \; \\

+& = 0 ?

+\end{align}

+

+Please punctuate a displayed equation in the same way as ordinary

+text but with a small space before the end punctuation.

+

+\subsection{Program Code}

+

+Program listings or program commands in the text are normally set in

+typewriter font, e.g., CMTT10 or Courier.

+

+\medskip

+

+\noindent

+{\it Example of a Computer Program}

+\begin{verbatim}

+program Inflation (Output)

+  {Assuming annual inflation rates of 7%, 8%, and 10%,...

+   years};

+   const

+     MaxYears = 10;

+   var

+     Year: 0..MaxYears;

+     Factor1, Factor2, Factor3: Real;

+   begin

+     Year := 0;

+     Factor1 := 1.0; Factor2 := 1.0; Factor3 := 1.0;

+     WriteLn('Year  7% 8% 10%'); WriteLn;

+     repeat

+       Year := Year + 1;

+       Factor1 := Factor1 * 1.07;

+       Factor2 := Factor2 * 1.08;

+       Factor3 := Factor3 * 1.10;

+       WriteLn(Year:5,Factor1:7:3,Factor2:7:3,Factor3:7:3)

+     until Year = MaxYears

+end.

+\end{verbatim}

+%

+\noindent

+{\small (Example from Jensen K., Wirth N. (1991) Pascal user manual and

+report. Springer, New York)}

+

+

+\subsection{Footnotes}

+

+The superscript numeral used to refer to a footnote appears in the text

+either directly after the word to be discussed or -- in relation to a

+phrase or a sentence -- following the punctuation sign (comma,

+semicolon, or full stop). Footnotes should appear at the bottom of

+the

+normal text area, with a line of about 2~cm in \TeX\ and about 5~cm in

+Word set

+immediately above them.\footnote{The footnote numeral is set flush left

+and the text follows with the usual word spacing. Second and subsequent

+lines are indented. Footnotes should end with a full stop.}

+

+\subsection{Citations}

+

+The list of references is headed ``References" and is not assigned a

+number

+in the decimal system of headings. The list should be set in small print

+and placed at the end of your contribution, in front of the appendix,

+if one exists.

+Please do not insert a pagebreak before the list of references if the

+page is not completely filled.

+An example is given at the

+end of this information sheet. For citations in the text please use

+square brackets and consecutive numbers: \cite{Alpher02},

+\cite{Alpher03}, \cite{Alpher04} \dots

+

+

+\bibliographystyle{splncs}

+\bibliography{egbib}

+

+\clearpage\mbox{}Page \thepage\ of the manuscript.

+\clearpage\mbox{}Page \thepage\ of the manuscript.

+\clearpage\mbox{}Page \thepage\ of the manuscript.

+\clearpage\mbox{}Page \thepage\ of the manuscript.

+\clearpage\mbox{}Page \thepage\ of the manuscript.

+\clearpage\mbox{}Page \thepage\ of the manuscript.

+This is the last page of the manuscript.

+\par\vfill\par

+Now we have reached the maximum size of the ECCV 2012 submission.

+\end{document}