diff options
| -rw-r--r-- | eccv.tex | 449 |
1 files changed, 0 insertions, 449 deletions
diff --git a/eccv.tex b/eccv.tex deleted file mode 100644 index d044ef4..0000000 --- a/eccv.tex +++ /dev/null @@ -1,449 +0,0 @@ -% last updated in April 2002 by Antje Endemann
-% Based on CVPR 07 and LNCS, with modifications by DAF, AZ and elle, 2008 and AA, 2010, and CC, 2011
-
-\documentclass[runningheads]{llncs}
-\usepackage{graphicx}
-\usepackage{amsmath,amssymb} % define this before the line numbering.
-\usepackage{ruler}
-\usepackage{color}
-\usepackage[width=122mm,left=12mm,paperwidth=146mm,height=193mm,top=12mm,paperheight=217mm]{geometry}
-\begin{document}
-% \renewcommand\thelinenumber{\color[rgb]{0.2,0.5,0.8}\normalfont\sffamily\scriptsize\arabic{linenumber}\color[rgb]{0,0,0}}
-% \renewcommand\makeLineNumber {\hss\thelinenumber\ \hspace{6mm} \rlap{\hskip\textwidth\ \hspace{6.5mm}\thelinenumber}}
-% \linenumbers
-\pagestyle{headings}
-\mainmatter
-\def\ECCV12SubNumber{***} % Insert your submission number here
-
-\title{Author Guidelines for ECCV Submission} % Replace with your title
-
-\titlerunning{ECCV-12 submission ID \ECCV12SubNumber}
-
-\authorrunning{ECCV-12 submission ID \ECCV12SubNumber}
-
-\author{Anonymous ECCV submission}
-\institute{Paper ID \ECCV12SubNumber}
-
-
-\maketitle
-
-\begin{abstract}
-The abstract should summarize the contents of the paper and should
-contain at least 70 and at most 300 words. It should be set in 9-point
-font size and should be inset 1.0~cm from the right and left margins.
-\dots
-\end{abstract}
-
-
-\section{Introduction}
-
-
-Please follow the steps outlined below when submitting your manuscript.
-
-%-------------------------------------------------------------------------
-
-\subsection{Language}
-
-All manuscripts must be in English.
-
-\subsection{Paper length}
-The basic length is 12 pages, but up to two additional pages may be
-purchased in the final printed proceedings. This brings the {\em
-maximum} length for submission to 14 pages. Overlength papers will
-simply not be reviewed. This includes papers where the margins and
-formatting are deemed to have been significantly altered from those
-laid down by this style guide. The reason such papers will not be
-reviewed is that there is no provision for supervised revisions of
-manuscripts. The reviewing process cannot determine the suitability of
-the paper for presentation in 14 pages if it is reviewed in 16.
-
-\subsection{Dual submission}
-
-By submitting a manuscript to ECCV, the author(s) assert that it
-has not been previously published in substantially similar form.
-Furthermore, no paper which contains significant overlap with the
-contributions of this paper either has been or will be submitted
-during the ECCV 2012 review period to either a journal or a
-conference.
-
-If there are any papers that may appear to the reviewers to violate
-this condition, then it is your responsibility to (1) cite these
-papers (preserving anonymity as described in section~\ref{sec:blind}
-of this example paper, (2) argue in the body of your paper why your
-ECCV paper is nontrivially different from these concurrent
-submissions, and (3) include anonymized versions of those papers in
-the supplemental material.
-
-\subsection{Supplemental Material}
-
-Authors may optionally upload supplemental material. Typically, this
-material might include videos of results that cannot be included in
-the main paper, anonymized related submissions to other conferences
-and journals, and appendices or technical reports containing extended
-proofs and mathematical derivations that are not essential for
-understanding of the paper. Note that the contents of the supplemental
-material should be referred to appropriately in the paper and that
-reviewers are not obliged to look at it.
-
-All supplemental material must be zipped or tarred into a single
-file. There is a 50MB limit on the size of this file. The deadline for
-supplemental material is five days after the main paper deadline.
-
-%-------------------------------------------------------------------------
-\subsection{Line numbering}
-
-All lines should be numbered, as in this example document. This makes
-reviewing more efficient, because reviewers can refer to a line on a
-page. If you are preparing a document using a non-\LaTeX\
-document preparation system, please arrange for an equivalent line numbering.
-
-\subsection{Mathematics}
-
-Please number all of your sections and displayed equations. Again,
-this makes reviewing more efficient, because reviewers can refer to a
-line on a page. Also, it is important for readers to be able to refer
-to any particular equation. Just because you didn't refer to it in
-the text doesn't mean some future reader might not need to refer to
-it. It is cumbersome to have to use circumlocutions like ``the
-equation second from the top of page 3 column 1''. (Note that the
-line numbering will not be present in the final copy, so is not an
-alternative to equation numbers). Some authors might benefit from
-reading Mermin's description of how to write mathematics:
-\url{http://www.cvpr.org/doc/mermin.pdf}.
-
-
-\section{Blind review}
-\label{sec:blind}
-
-Many authors misunderstand the concept of anonymizing for blind
-review. Blind review does not mean that one must remove
-citations to one's own work---in fact it is often impossible to
-review a paper unless the previous citations are known and
-available.
-
-Blind review means that you do not use the words ``my'' or ``our''
-when citing previous work. That is all. (But see below for
-techreports).
-
-Saying ``this builds on the work of Lucy Smith [1]'' does not say
-that you are Lucy Smith, it says that you are building on her
-work. If you are Smith and Jones, do not say ``as we show in
-[7]'', say ``as Smith and Jones show in [7]'' and at the end of the
-paper, include reference 7 as you would any other cited work.
-
-An example of a bad paper:
-\begin{quote}
-\begin{center}
- An analysis of the frobnicatable foo filter.
-\end{center}
-
- In this paper we present a performance analysis of our
- previous paper [1], and show it to be inferior to all
- previously known methods. Why the previous paper was
- accepted without this analysis is beyond me.
-
- [1] Removed for blind review
-\end{quote}
-
-
-An example of an excellent paper:
-
-\begin{quote}
-\begin{center}
- An analysis of the frobnicatable foo filter.
-\end{center}
-
- In this paper we present a performance analysis of the
- paper of Smith [1], and show it to be inferior to
- all previously known methods. Why the previous paper
- was accepted without this analysis is beyond me.
-
- [1] Smith, L and Jones, C. ``The frobnicatable foo
- filter, a fundamental contribution to human knowledge''.
- Nature 381(12), 1-213.
-\end{quote}
-
-If you are making a submission to another conference at the same
-time, which covers similar or overlapping material, you may need
-to refer to that submission in order to explain the differences,
-just as you would if you had previously published related work. In
-such cases, include the anonymized parallel
-submission~\cite{Authors12} as additional material and cite it as
-\begin{quote}
-1. Authors. ``The frobnicatable foo filter'', BMVC 2012 Submission
-ID 324, Supplied as additional material {\tt bmvc12.pdf}.
-\end{quote}
-
-Finally, you may feel you need to tell the reader that more
-details can be found elsewhere, and refer them to a technical
-report. For conference submissions, the paper must stand on its
-own, and not {\em require} the reviewer to go to a techreport for
-further details. Thus, you may say in the body of the paper
-``further details may be found in~\cite{Authors12b}''. Then
-submit the techreport as additional material. Again, you may not
-assume the reviewers will read this material.
-
-Sometimes your paper is about a problem which you tested using a tool which
-is widely known to be restricted to a single institution. For example,
-let's say it's 1969, you have solved a key problem on the Apollo lander,
-and you believe that the ECCV audience would like to hear about your
-solution. The work is a development of your celebrated 1968 paper entitled
-``Zero-g frobnication: How being the only people in the world with access to
-the Apollo lander source code makes us a wow at parties'', by Zeus.
-
-You can handle this paper like any other. Don't write ``We show how to
-improve our previous work [Anonymous, 1968]. This time we tested the
-algorithm on a lunar lander [name of lander removed for blind review]''.
-That would be silly, and would immediately identify the authors. Instead
-write the following:
-\begin{quotation}
-\noindent
- We describe a system for zero-g frobnication. This
- system is new because it handles the following cases:
- A, B. Previous systems [Zeus et al. 1968] didn't
- handle case B properly. Ours handles it by including
- a foo term in the bar integral.
-
- ...
-
- The proposed system was integrated with the Apollo
- lunar lander, and went all the way to the moon, don't
- you know. It displayed the following behaviours
- which show how well we solved cases A and B: ...
-\end{quotation}
-As you can see, the above text follows standard scientific convention,
-reads better than the first version, and does not explicitly name you as
-the authors. A reviewer might think it likely that the new paper was
-written by Zeus, but cannot make any decision based on that guess.
-He or she would have to be sure that no other authors could have been
-contracted to solve problem B. \\
-
-\noindent FAQ: Are acknowledgements OK? No. Please {\bf omit
-acknowledgements} in your review copy; they can go in the final copy.
-
-
-
-\section{Manuscript Preparation}
-This is an edited version of Springer LNCS instructions adapted
-for ECCV 2012 first paper submission.
-
-You are strongly encouraged to use \LaTeX2$_\varepsilon$ for the
-preparation of your
-camera-ready manuscript together with the corresponding Springer
-class file \verb+llncs.cls+.
-
-We would like to stress that the class/style files and the template
-should not be manipulated and that the guidelines regarding font sizes
-and format should be adhered to. This is to ensure that the end product
-is as homogeneous as possible.
-
-\subsection{Printing Area}
-The printing area is $122 \; \mbox{mm} \times 193 \;
-\mbox{mm}$.
-The text should be justified to occupy the full line width,
-so that the right margin is not ragged, with words hyphenated as
-appropriate. Please fill pages so that the length of the text
-is no less than 180~mm.
-
-\subsection{Layout, Typeface, Font Sizes, and Numbering}
-Use 10-point type for the name(s) of the author(s) and 9-point type for
-the address(es) and the abstract. For the main text, please use 10-point
-type and single-line spacing.
-We recommend using Computer Modern Roman (CM) fonts, Times, or one
-of the similar typefaces widely used in photo-typesetting.
-(In these typefaces the letters have serifs, i.e., short endstrokes at
-the head and the foot of letters.)
-Italic type may be used to emphasize words in running text. Bold
-type and underlining should be avoided.
-With these sizes, the interline distance should be set so that some 45
-lines occur on a full-text page.
-
-\subsubsection{Headings.}
-
-Headings should be capitalized
-(i.e., nouns, verbs, and all other words
-except articles, prepositions, and conjunctions should be set with an
-initial capital) and should,
-with the exception of the title, be aligned to the left.
-Words joined by a hyphen are subject to a special rule. If the first
-word can stand alone, the second word should be capitalized.
-The font sizes
-are given in Table~\ref{table:headings}.
-\setlength{\tabcolsep}{4pt}
-\begin{table}
-\begin{center}
-\caption{Font sizes of headings. Table captions should always be
-positioned {\it above} the tables. The final sentence of a table
-caption should end without a full stop}
-\label{table:headings}
-\begin{tabular}{lll}
-\hline\noalign{\smallskip}
-Heading level & Example & Font size and style\\
-\noalign{\smallskip}
-\hline
-\noalign{\smallskip}
-Title (centered) & {\Large \bf Lecture Notes \dots} & 14 point, bold\\
-1st-level heading & {\large \bf 1 Introduction} & 12 point, bold\\
-2nd-level heading & {\bf 2.1 Printing Area} & 10 point, bold\\
-3rd-level heading & {\bf Headings.} Text follows \dots & 10 point, bold
-\\
-4th-level heading & {\it Remark.} Text follows \dots & 10 point,
-italic\\
-\hline
-\end{tabular}
-\end{center}
-\end{table}
-\setlength{\tabcolsep}{1.4pt}
-
-Here are
-some examples of headings: ``Criteria to Disprove Context-Freeness of
-Collage Languages'', ``On Correcting the Intrusion of Tracing
-Non-deterministic Programs by Software'', ``A User-Friendly and
-Extendable Data Distribution System'', ``Multi-flip Networks:
-Parallelizing GenSAT'', ``Self-determinations of Man''.
-
-\subsubsection{Lemmas, Propositions, and Theorems.}
-
-The numbers accorded to lemmas, propositions, and theorems etc. should
-appear in consecutive order, starting with the number 1, and not, for
-example, with the number 11.
-
-\subsection{Figures and Photographs}
-\label{sect:figures}
-
-Please produce your figures electronically and integrate
-them into your text file. For \LaTeX\ users we recommend using package
-\verb+graphicx+ or the style files \verb+psfig+ or \verb+epsf+.
-
-Check that in line drawings, lines are not
-interrupted and have constant width. Grids and details within the
-figures must be clearly readable and may not be written one on top of
-the other. Line drawings should have a resolution of at least 800 dpi
-(preferably 1200 dpi).
-For digital halftones 300 dpi is usually sufficient.
-The lettering in figures should have a height of 2~mm (10-point type).
-Figures should be scaled up or down accordingly.
-Please do not use any absolute coordinates in figures.
-
-Figures should be numbered and should have a caption which should
-always be positioned {\it under} the figures, in contrast to the caption
-belonging to a table, which should always appear {\it above} the table.
-Please center the captions between the margins and set them in
-9-point type
-(Fig.~\ref{fig:example} shows an example).
-The distance between text and figure should be about 8~mm, the
-distance between figure and caption about 5~mm.
-\begin{figure}
-\centering
-\includegraphics[height=7.2cm]{eijkel2}
-\caption{One kernel at $x_s$ ({\it dotted kernel}) or two kernels at
-$x_i$ and $x_j$ ({\it left and right}) lead to the same summed estimate
-at $x_s$. This shows a figure consisting of different types of
-lines. Elements of the figure described in the caption should be set in
-italics,
-in parentheses, as shown in this sample caption. The last
-sentence of a figure caption should generally end without a full stop}
-\label{fig:example}
-\end{figure}
-
-If possible (e.g. if you use \LaTeX) please define figures as floating
-objects. \LaTeX\ users, please avoid using the location
-parameter ``h'' for ``here''. If you have to insert a pagebreak before a
-figure, please ensure that the previous page is completely filled.
-
-
-\subsection{Formulas}
-
-Displayed equations or formulas are centered and set on a separate
-line (with an extra line or halfline space above and below). Displayed
-expressions should be numbered for reference. The numbers should be
-consecutive within the contribution,
-with numbers enclosed in parentheses and set on the right margin.
-For example,
-\begin{align}
- \psi (u) & = \int_{0}^{T} \left[\frac{1}{2}
- \left(\Lambda_{0}^{-1} u,u\right) + N^{\ast} (-u)\right] dt \; \\
-& = 0 ?
-\end{align}
-
-Please punctuate a displayed equation in the same way as ordinary
-text but with a small space before the end punctuation.
-
-\subsection{Program Code}
-
-Program listings or program commands in the text are normally set in
-typewriter font, e.g., CMTT10 or Courier.
-
-\medskip
-
-\noindent
-{\it Example of a Computer Program}
-\begin{verbatim}
-program Inflation (Output)
- {Assuming annual inflation rates of 7%, 8%, and 10%,...
- years};
- const
- MaxYears = 10;
- var
- Year: 0..MaxYears;
- Factor1, Factor2, Factor3: Real;
- begin
- Year := 0;
- Factor1 := 1.0; Factor2 := 1.0; Factor3 := 1.0;
- WriteLn('Year 7% 8% 10%'); WriteLn;
- repeat
- Year := Year + 1;
- Factor1 := Factor1 * 1.07;
- Factor2 := Factor2 * 1.08;
- Factor3 := Factor3 * 1.10;
- WriteLn(Year:5,Factor1:7:3,Factor2:7:3,Factor3:7:3)
- until Year = MaxYears
-end.
-\end{verbatim}
-%
-\noindent
-{\small (Example from Jensen K., Wirth N. (1991) Pascal user manual and
-report. Springer, New York)}
-
-
-\subsection{Footnotes}
-
-The superscript numeral used to refer to a footnote appears in the text
-either directly after the word to be discussed or -- in relation to a
-phrase or a sentence -- following the punctuation sign (comma,
-semicolon, or full stop). Footnotes should appear at the bottom of
-the
-normal text area, with a line of about 2~cm in \TeX\ and about 5~cm in
-Word set
-immediately above them.\footnote{The footnote numeral is set flush left
-and the text follows with the usual word spacing. Second and subsequent
-lines are indented. Footnotes should end with a full stop.}
-
-\subsection{Citations}
-
-The list of references is headed ``References" and is not assigned a
-number
-in the decimal system of headings. The list should be set in small print
-and placed at the end of your contribution, in front of the appendix,
-if one exists.
-Please do not insert a pagebreak before the list of references if the
-page is not completely filled.
-An example is given at the
-end of this information sheet. For citations in the text please use
-square brackets and consecutive numbers: \cite{Alpher02},
-\cite{Alpher03}, \cite{Alpher04} \dots
-
-
-\bibliographystyle{splncs}
-\bibliography{egbib}
-
-\clearpage\mbox{}Page \thepage\ of the manuscript.
-\clearpage\mbox{}Page \thepage\ of the manuscript.
-\clearpage\mbox{}Page \thepage\ of the manuscript.
-\clearpage\mbox{}Page \thepage\ of the manuscript.
-\clearpage\mbox{}Page \thepage\ of the manuscript.
-\clearpage\mbox{}Page \thepage\ of the manuscript.
-This is the last page of the manuscript.
-\par\vfill\par
-Now we have reached the maximum size of the ECCV 2012 submission.
-\end{document}
|